FireFly
02-24-2008, 02:24 PM
GPS/Plotter, Black Box Fish Finder, Transducer, C-Map, Blank Card...
(1) CP1000C with NEW Dual Frequency Fish Finder Option
Plotter is in mint condition with no scratches or water spots on screen and has latest firmware update installed by Standard Horizon factory.
10.4" Color Sunlight Viewable WAAS GPS / C-Map MAX compatible Chart Plotter
New: Updated Menu that operates similar to Windows Start key, 200MHz Processor-blazing fast chart redraws, Built-in 2NM base maps that shows depth contours and major navigation bouys, NMEA smart antenna which the cable can be cut and spliced and compatible with FF520 Dual Frequency (50/200kHz) and Dual Power (500W/1kW) black box sounder with transducer ID and digital filtering.
DSC Polling Capability: Connect the CP1000C to the QUEST+, MATRIX or QUANTUM to show and navigate to DSC Distress calls, DSC Position Requests and DSC Position send VHF transmissions.
Optional Fish Finding Capability: The FF520 (included) Fish Finder option brings high-end fish finding capability to Standard Horizon's CP155C, CP175C and CP1000C WAAS GPS Chart plotters making them the ideal choice for casual or professional anglers alike.
The FF520 Dual Frequency (50 and 200kHz) Black Box Fish Finder's advanced filtering eliminates unwanted noise and sharpens return echos for enhanced separation and detection.
Transducer ID™ allows the FF520 to query the transducer (included) to determine its performance characteristics. Power output, frequency, beam pattern and other unique transducer characteristics are sent to the fish finder. this data allows the fish finder to fine tune itself to match the transducer which optimizes overall system performance. No matter what the conditions, you will be able to fine tune your fishing rather than the fish finder.
DST TRANSDUCERS
Note: Transducer ID™ is a registered trademark of AIRMAR Technology Corporation, Milford.
Programmable Direct Access Page keys
The CP1000C has 5 keys located under the display. By default these keys allow direct selection of the Chart, Navigation, Highway, Tide & Celestial, and NMEA Input pages. These key can be programmed to change to the pages you want to see, simply by pressing the key once and press and holding the key you can select to show Depth, SOG, Temp or Wind Trend pages, access the User points list or User C-Card. Clear, Simple and Fast...
Dedicated Navigation Keys
Using a GPS Chart Plotter has never been so easy! The CP1000C has dedicated MARK and ROUTE keys that allows the creation of a single waypoint or creation of a route right on the Chart Page. Want to navigate to one of the marks or to a Route, the GOTO key allows you to do so directly on the chart or via the popup menu when the key is pressed.
Designed For C-Map NT or NT+ Cartography
The CP1000C is compatible to the C-Map cartography which has rattled off an amazing "Five for Five" winning streak that dates back to 1999 by the NMEA (National Marine Electronics Association) for "BEST ELECTRONIC CARTOGRAPHY".
WAAS (Wide Area Augumentation System)
A 12-channel WAAS receiver is the heart of the CP1000C. WAAS, the latest receiver technology improves the accuracy and integrity of basic GPS signals. WAAS delivers pinpoint repeatable accuracy to within 3 meters of a vessel's actual position. This new technology allows every boater to obtain the accuracy of a Differential GPS without the additional expense. The WAAS system currently covers the United States, Canada, Mexico and parts of northern South America. Additionally, the CP1000C is EGNOS and MSAS ready which will extend superior receiver performance to the United Kingdom and European Continent.
VHF Digital Selective Calling and Position Polling
The CP1000C GPS Chart Plotter has the capability to be connected to STANDARD HORIZON VHF Fixed mounted radios with DSC polling capability. This is done by simply connecting 3 wires between the CP1000C and the VHF. Connecting the products together allow you to securely and totally privately poll and display another vessels position on the display of the CP1000C. To take this one step further, the CP1000C has a DSC Call directory that logs the position of the polled vessels and also the position of a vessel that has transmitted a DSC Distress call. STANDARD HORIZON pioneered this function, leading the industry with innovative features and function
Dual Video Camera or DVD connections and more!
Dual Color Video Camera inputs for connecting optional STANDARD HORIZON Color cameras or any off the shelf DVD or VCR.
Simple Menu driven Better cursor control via unique "ShuttlePoint" system
Simple Menu driven software
Five "Hot Keys" set to a factory default that can be set to give the user instant access to any screen or page
Celestial Page calculates and displays sun/moon rise/set times along with high and low water tide information
Port Services and detailed tide information available when an optional C-MAP NT card is inserted
User configurable data fields can be viewed in normal or large fronts
Marks and Routes name can be up to 10 characters long
PC upload and downloading of Marks, Waypoints and Routes with optional C-MAP PLANNER NT software
Optional user C-Card to store Marks, Waypoints and Routes
16 selectable Icons can be displayed on the chart page to ease recognition of saved marks and waypoints
(1) FF520
The Standard Horizon FF520 Digital Black Box Fish Finder can turn your CP-155C,CP-175C, or CP-1000C into a 500/1000 Watt powerhouse. The FF520 features advanced filtering, which will eliminate unwanted noise and sharpens echoes to enhance separation and detection. The FF520 Black Box Fish Finder features Transducer ID, which will detect the transducer that is connected and automatically adjust the settings in the unit to optimize the performance of your system.
(1) DST525 In Hull Transducer
(1) C-MAP NA-M301 C-CARD FORMAT PASSAMAQUODDY - NARRAGANSETT
(1) Blank C-Map C-Card for storing waypoints
$1100 for everything.
(1) CP1000C with NEW Dual Frequency Fish Finder Option
Plotter is in mint condition with no scratches or water spots on screen and has latest firmware update installed by Standard Horizon factory.
10.4" Color Sunlight Viewable WAAS GPS / C-Map MAX compatible Chart Plotter
New: Updated Menu that operates similar to Windows Start key, 200MHz Processor-blazing fast chart redraws, Built-in 2NM base maps that shows depth contours and major navigation bouys, NMEA smart antenna which the cable can be cut and spliced and compatible with FF520 Dual Frequency (50/200kHz) and Dual Power (500W/1kW) black box sounder with transducer ID and digital filtering.
DSC Polling Capability: Connect the CP1000C to the QUEST+, MATRIX or QUANTUM to show and navigate to DSC Distress calls, DSC Position Requests and DSC Position send VHF transmissions.
Optional Fish Finding Capability: The FF520 (included) Fish Finder option brings high-end fish finding capability to Standard Horizon's CP155C, CP175C and CP1000C WAAS GPS Chart plotters making them the ideal choice for casual or professional anglers alike.
The FF520 Dual Frequency (50 and 200kHz) Black Box Fish Finder's advanced filtering eliminates unwanted noise and sharpens return echos for enhanced separation and detection.
Transducer ID™ allows the FF520 to query the transducer (included) to determine its performance characteristics. Power output, frequency, beam pattern and other unique transducer characteristics are sent to the fish finder. this data allows the fish finder to fine tune itself to match the transducer which optimizes overall system performance. No matter what the conditions, you will be able to fine tune your fishing rather than the fish finder.
DST TRANSDUCERS
Note: Transducer ID™ is a registered trademark of AIRMAR Technology Corporation, Milford.
Programmable Direct Access Page keys
The CP1000C has 5 keys located under the display. By default these keys allow direct selection of the Chart, Navigation, Highway, Tide & Celestial, and NMEA Input pages. These key can be programmed to change to the pages you want to see, simply by pressing the key once and press and holding the key you can select to show Depth, SOG, Temp or Wind Trend pages, access the User points list or User C-Card. Clear, Simple and Fast...
Dedicated Navigation Keys
Using a GPS Chart Plotter has never been so easy! The CP1000C has dedicated MARK and ROUTE keys that allows the creation of a single waypoint or creation of a route right on the Chart Page. Want to navigate to one of the marks or to a Route, the GOTO key allows you to do so directly on the chart or via the popup menu when the key is pressed.
Designed For C-Map NT or NT+ Cartography
The CP1000C is compatible to the C-Map cartography which has rattled off an amazing "Five for Five" winning streak that dates back to 1999 by the NMEA (National Marine Electronics Association) for "BEST ELECTRONIC CARTOGRAPHY".
WAAS (Wide Area Augumentation System)
A 12-channel WAAS receiver is the heart of the CP1000C. WAAS, the latest receiver technology improves the accuracy and integrity of basic GPS signals. WAAS delivers pinpoint repeatable accuracy to within 3 meters of a vessel's actual position. This new technology allows every boater to obtain the accuracy of a Differential GPS without the additional expense. The WAAS system currently covers the United States, Canada, Mexico and parts of northern South America. Additionally, the CP1000C is EGNOS and MSAS ready which will extend superior receiver performance to the United Kingdom and European Continent.
VHF Digital Selective Calling and Position Polling
The CP1000C GPS Chart Plotter has the capability to be connected to STANDARD HORIZON VHF Fixed mounted radios with DSC polling capability. This is done by simply connecting 3 wires between the CP1000C and the VHF. Connecting the products together allow you to securely and totally privately poll and display another vessels position on the display of the CP1000C. To take this one step further, the CP1000C has a DSC Call directory that logs the position of the polled vessels and also the position of a vessel that has transmitted a DSC Distress call. STANDARD HORIZON pioneered this function, leading the industry with innovative features and function
Dual Video Camera or DVD connections and more!
Dual Color Video Camera inputs for connecting optional STANDARD HORIZON Color cameras or any off the shelf DVD or VCR.
Simple Menu driven Better cursor control via unique "ShuttlePoint" system
Simple Menu driven software
Five "Hot Keys" set to a factory default that can be set to give the user instant access to any screen or page
Celestial Page calculates and displays sun/moon rise/set times along with high and low water tide information
Port Services and detailed tide information available when an optional C-MAP NT card is inserted
User configurable data fields can be viewed in normal or large fronts
Marks and Routes name can be up to 10 characters long
PC upload and downloading of Marks, Waypoints and Routes with optional C-MAP PLANNER NT software
Optional user C-Card to store Marks, Waypoints and Routes
16 selectable Icons can be displayed on the chart page to ease recognition of saved marks and waypoints
(1) FF520
The Standard Horizon FF520 Digital Black Box Fish Finder can turn your CP-155C,CP-175C, or CP-1000C into a 500/1000 Watt powerhouse. The FF520 features advanced filtering, which will eliminate unwanted noise and sharpens echoes to enhance separation and detection. The FF520 Black Box Fish Finder features Transducer ID, which will detect the transducer that is connected and automatically adjust the settings in the unit to optimize the performance of your system.
(1) DST525 In Hull Transducer
(1) C-MAP NA-M301 C-CARD FORMAT PASSAMAQUODDY - NARRAGANSETT
(1) Blank C-Map C-Card for storing waypoints
$1100 for everything.