PDA

View Full Version : Looking for a 4 inch Brass Hinge... HELP!!


PeteV
05-20-2004, 02:08 PM
I could use your help. I'm looking for Brass Hinges (one of mine broke) and I can't seem to find ones Big enough. The long dimension of the Hinge is 4 inches. I seem to find them with a max length of 3 inches.

The hinge is used for the seats on an Old "Finest Kind" boat. I've been searching for months and would appreciate any leads. I've done all the Hardware stores & places like West Marine & Boat US. I've even tried some of the links in "Wooden Boat" magazine but just can't seem to find them.

The attached pic shows one of the Old hinges. Thank you.

Ray
05-20-2004, 02:23 PM
I don't know if this will help, but try calling these guys

http://brass-hinges-fittings.netfirms.com/products7.htm

Also try McMaster-Carr

PeteV
05-20-2004, 03:58 PM
Thanks Ray,

The site didn't have the big ones.

I was pointed to :
http://www.cgedwards.com/phoenix/phnx6.html

and found out the freakin things are $20 per hinge. Yikes!!!
(it was called:Model 181 Cuddy Door Hinge 4 X 1&9/16)

Thanks for the tip.

mansfieldsign
05-20-2004, 05:10 PM
Hi PeteV, Did you try www.jamestowndistributors.com ? Boat builders supply

rs29wt
05-20-2004, 06:25 PM
Try this place out..
WFG.

http://www.boatersworld.com/

Search Hinge

PeteV
05-21-2004, 09:34 AM
Thanks guys ... both sites have the 3" but not the 4"... The Jamestown stuff is pretty nice ...

mansfieldsign
05-21-2004, 09:55 AM
Another I use --Defender www.defender.com
I can't find my slips on this one but you can look them up on the web
HAMILTON MARINE, Searsport, ME. --very nice people, real marine items.